5.8GHz Out of doors Wi-fi Bridge Level to Level Entry PTP/PTMP Plug & Play CPE Community 100Mbps 1.8ML Lengthy Vary Out of doors WiFi Extender with 14DBI Excessive Achieve Antenna, POE Energy Adapter

Value: $97.99
(as of May 20,2023 21:43:36 UTC – Particulars)

Product Description

Mannequin
CPE320
CPE550
CPE560
CPE1100
CPE1201
Mount(2 Pack)

Transmission Pace
100Mbps
100Mbps
100Mbps
1000Mbps
1000Mbps

Wi-fi Bands
5.8G
5.8G
5.8G
5.8G
5.8G

Distance
2KM / 1.2ML
3KM / 1.8ML
3KM / 1.8ML
3KM / 1.8ML
3KM / 1.8ML

Ethernet LAN Port
2 * 100Mbps RJ45 Port
2 * 100Mbps RJ45 Port
2 * 100Mbps RJ45 Port
1 * 100Mbps + 1 * 1000Mbps RJ45 Port
1 * 100Mbps + 1 * 1000Mbps RJ45 Port

Wi-fi Bridge
✓
✓
✓
✓
✓

Utility
Out of doors
Out of doors
Out of doors
Out of doors
Out of doors
Out of doors

WiFi Extender CPE550 Kits, Prolong your Community type One Constructing to One other with out Wire Connection

Nice for share web community to a protracted distance, works as outside entry level, handle video surveillance for various constructing

The CPE550 kits is one pair of outside excessive energy and excessive efficiency 100Mbps outside wi-fi bridge, which works at 5GHz frequency. Helps Level-to-Level and Level-to-Multipoint wi-fi connection. The wifi ethernet bridge is extra secure and better pace and anti-interference efficiency than 2.4GHz wi-fi bridge. Furthermore, it’s straightforward to handle by way of the WEB interface.

CPE550 Kits Operate:

A. the machine can works as Auto pairing mode: merely to make use of, join each bridges to the PoE energy adapter to begin working, it’s going to auto pair in jiffy. Customise mode: want join the bridges to the pc by way of ethernet cable, and configure the grasp & slave parameters, this mode go well with for skilled technician.

B. the machine can use for share web networks to a protracted distance, output WiFi scorching level, can also use for transmit the lengthy ranges IP cameras’ video stream to the management heart with out difficult wiring connection.

C. Auto pairing mode works for point-to-point entry connection, customise mode can configure the purpose to a number of level connection.

CPE550 Kits Utility:

1. Share web networks to an extended distance, the grasp bridge will get web and switch to slave which may connect with router or pc

2. Out of doors entry level, the grasp bridge connects to web supply and output WiFi scorching level transmit as much as 1.8 miles & 60 levels angle, you may get entry the WiFi scorching level on this space.

3. Join the IP cameras from one other constructing with out wire connection, you possibly can administration the totally different place IP cameras in a single DVR system.

4. Level to a number of level entry, you possibly can join a number of slave bridges, to administration a couple of constructing’s IP cameras in a single DVR system.

IF YOU DON’T HAVE ANY IT KNOWLEDGE, PLEASE CONSULT RELEVANT PROFESSIONALS BEFORE PURCHASING.

Level-to-Level Connection for Prolong Web Community

Connection Information

The grasp bridge and slave bridge should be put in by nose to nose, the antenna shouldn’t be omnidirectional, it has a 60 levels transmission angle, the straight set up with out blocking objects could be the perfect efficiency.

Wi-fi Bridge Grasp & Slave Set:

1.Grasp Bridge Setting

Transfer the mode swap to “A” place, the machine works as grasp bridge

2.Slave Bridge Setting

Transfer the mode swap to “B” place, the machine works as slave bridge

Wi-fi Bridge Connection

1.Bridge A Connection – Grasp Bridge

Step 1: the LAN port of the PoE Adapter connect with the router by way of an ethernet cable.

Step 2: the PoE port of the PoE adapter connect with LAN port of the grasp wi-fi bridge by one other ethernet cable.

2.Bridge B Connection – Slave Bridge

Step 1: the PoE port of the PoE adapter connect with the LAN port of slave bridge by way of an ethernet cable

Step 2: the LAN port of the PoE adapter connect with the LAN port of the pc or router by one other ethernet cable

Level-to-Level Connection for Video Surveillance

Connection Information

The grasp bridge and slave bridge should be put in by nose to nose, the antenna shouldn’t be omnidirectional, it has a 60 levels transmission angle, the straight set up with out blocking objects could be the perfect efficiency.

Wi-fi Bridge Grasp & Slave Set:

1.Grasp Bridge Setting

Transfer the mode swap to “A” place, the machine works as grasp bridge

2.Slave Bridge Setting

Transfer the mode swap to “B” place, the machine works as slave bridge

Wi-fi Bridge Connection

1.Bridge A Connection – Grasp Bridge

Step 1: the LAN port of the PoE Adapter connect with the DVR by way of an ethernet cable.

Step 2: the PoE port of the PoE adapter connect with LAN port of the grasp wi-fi bridge by one other ethernet cable.

2.Bridge B Connection – Slave Bridge

Step 1: the PoE port of the PoE adapter connect with the LAN port of slave bridge by way of an ethernet cable

Step 2: the LAN port of the PoE adapter connect with the LAN port of the swap by one other ethernet cable

Level-to-A number of Level Connection for Video Surveillance

Connection Information

The grasp bridge and slave bridge should be put in by nose to nose, the antenna shouldn’t be omnidirectional, it has a 60 levels transmission angle, the straight set up with out blocking objects could be the perfect efficiency.

Wi-fi Bridge Grasp & Slave Set:

1.Grasp Bridge Setting

Transfer the mode swap to “A” place, the machine works as grasp bridge

2.Slave Bridge Setting

Transfer the mode swap to “B” place, the machine works as slave bridge

Wi-fi Bridge Connection

1.Bridge A Connection – Grasp Bridge

Step 1: the LAN port of the PoE Adapter connect with the DVR by way of an ethernet cable.

Step 2: the PoE port of the PoE adapter connect with LAN port of the grasp bridge by one other ethernet cable.

2.Bridge B Connection – Slave Bridge

Step 1: the PoE port of the PoE adapter connect with the LAN port of slave bridge by way of an ethernet cable

Step 2: the LAN port of the PoE adapter connect with the LAN port of the IP cameras by one other ethernet cable

CPE550 Wi-fi Bridge Interface

Overview

The wifi entry level extender work by two modes, auto pairing mode with pre-programmed go well with for beginner and customise mode go well with for skilled consumer.

Auto pairing mode:

Join the bridges to the PoE energy adapter, the Energy LED lamp turns inexperienced, system is energy on, when each bridges are energy on, they are going to auto pair in a couple of minutes, in the course of the pairing the LAN standing LED lamps all flip inexperienced. The digital LED indicator shows the numeric in crimson coloration.

Yow will discover a great frequency with out interference by urgent the “RST” button to vary the channel, brief press the button, the LED indicator will show the numeric “0”,”1″,”2″,”3″…”F” one after the other, and alter in cycle, every numeric means a special frequency, yow will discover the main points within the consumer handbook.

On the auto pairing mode, the bridge additionally output WiFi scorching level, and the entry password is pre-programmed in auto paring mode. When the channel adjustments, the entry password adjustments as properly. For instance: the WiFi scorching level title is CPE5G_5G161, and the default password is zllinkcpe123456161, if the title is CPE5G_5G153, the password shall be zllinkcpe123456153. The final three numbers of the password should match the final three numbers of the title.

Customise mode:

At this mode the bridged should be linked to the pc and set totally different IP addresses and dealing modes, brief press the “RST” button won’t purposeful at this mode, however you possibly can press and maintain this button for over 10 seconds to reset to manufacturing facility setting.

Utility

Lengthy Vary Community Extension

Parameters

Community Interface: 10/100Mbps 2 * LAN Port

Knowledge Price: 11a: 54M, 48M, 36M, 24M, 18M, 12M, 9M, 6Mbps / 11n: 7.2M, 14.4M, 21.7M, 28.9M, 43.3M, 57.8M, 65M, 72.2M, 14.4M, 28.9M, 43.3M, 57.8M, 86.7M, 115.6M, 130M, 144.4Mbps

Energy Provide: POE 24V 1.0A

Antenna: 14DBi (5725～5875MHz)

Transmittion: 1.86 Miles / 3KM

Waterproof: IP65

Mud-proof: Assist

Working temperature: -4℉～158℉

Dimensions: 9.8” * 3.55” * 2.56”

Weight: 38.8 oz

[Easy Installation]: Pre-configured WiFi extender with ethernet port with construct in 14dBi panel antenna, the transmit/obtain (level to level) wi-fi distance greater than 3KM meters. Appropriate for lengthy vary video transmission level to level WiFi cowl, it helps Wi-fi AP, Wi-fi Repeater, Bridge mode, default Pre-program WDS mode, no want setting, it may possibly work two unit on the similar time, no want lengthy cable for connect with digicam along with your PC
[Long Range Transmission Distance]: As much as 3km, precise software distance must be lower than 3KM. Constructed-in 14DBi directional antenna can considerably enhance the transmission and reception efficiency of wi-fi indicators. Timber won’t block the transmission pace of the wi-fi bridge, appropriate for warehouses or garages subsequent to your own home. The purpose to level bridge outside is a cool WiFi entry level extender. Share the identical community along with your storage, barn, secure, warehouse, store ect.
[Widely Applications]: Anywhere required cameras Level to Level/Multi-Level connection Consumer Bridge for Elevator Monitor networks. Out of doors wi-fi bridge router connects an IP Wi-fi Digicam to a secondary port and make the most of its long-range connectivity to ship video again by way of the wi-fi community for prolonged protection. This long-range wi-fi bridge is broadly utilized in many venues.
[Built for Outdoor Wi-Fi Coverage]: IP66-rated weatherproof housing that ensures continued operation on harsh outside environments or in climates of utmost chilly, warmth or steady moisture. This outside wi-fi bridge aka WiFi entry level extender Can be utilized in any setting.Lightning Safety, Waterproof, Dustproof, Antifreeze, Excessive-Temperature Resistant,the secondary Ethernet port can energy an exterior machine, comparable to a PoE safety digicam, for seamless IP video integration.