Antakipro AP-420 4-Channel DJ Amp

Antakipro AP-420 is a Class-D audio amplifier that delivers high power output, making it ideal for use in clubs or on stage. The amplifier has a smart design and is equipped with intelligent soft boot, overload, overheat, and short-circuit protection. The unit features a compact steel frame that can resist compression and shocks, with built-in low-frequency exciter and can work in stereo, parallel and bridge modes. The amplifier can function within a voltage range of 60V-400V and has a power correction factor cos (f) of >0.95 @ >500 W.

The amplifier has a maximum output voltage/current of 185V/85A (370V in the bridge mode). The gain, sensitivity of the amplifier is 32dB, 35dB, 38dB, 41dB, and it has a standby power consumption of 47W and 0.8A. The cooling system is through a tunnel and can operate at an operating temperature of 0 Degrees – 45C / 32 Degrees – 113 Degrees F, with a frequency range of 20 Hz – 20 kHz (1 W @ 8 ohms, +/ – 0.5 dB). The amplifier’s total harmonic distortion (THD) is less than 0.5% from 1 W to full power (Typical value<0.05%) and has a signal-to-noise ratio of >110 dBA (20 Hz – 20 kHz, A-weighted).

The Antakipro AP-420 amplifier has a front panel with one PCS Green LED that indicates the input signal of XLR = – 40dB. There are also four pieces of Green LED Indicator LED/per channel that display the output signal ( – 20dB, – 10dB, – 5dB, – 3dB) of SPEAKON, one-piece dual LED (Yellow and Red) for protective state/Clip state/Overheat/Overload. It has LED screens that display per channel operation mode: Mono mode, Bridge mode, and Stereo mode, and also display the temperature of the equipment.

The Antakipro AP-420 amplifier has a power cord that is 1.5 meters long and multiple-function switches such as two Sensitivity Switches, one Mode Switch, and one Clip Switch. The dimensions include 482 x 44 x 380mm / 482 x 44 x 470mm and the net weight is 10Kg/12Kg (22.04 -26 lbs). The packing size is 580 x 580 x 119mm / 615 x 615 x 119mm, and the shipping weight is 12Kg/14Kg.

EIAJ Test Standard, 1 kHz, 1% THD: 4 x 2000 Watts @ 8 Ohms; 4 x 3400 Watts @ 4 Ohms; 4 x 4760 Watts @ 2 Ohms; 2 x 6800 Watts 8 Ohms Bridged; 2 x 9520 Watts 4 Ohms Bridged. The amplifier’s 1/8 Maximum Power Output in 4 Ohms is 2125 Watts, 11.275 Amps 4 Channel; 2125 Watts, 22.5 Amps Bridged, and its 1/4 Maximum Power Output in 4 Ohms is 3750 Watts, 19.5 Amps 4 Channel; 3750 Watts, 39 Amps Bridged.

The Antakipro AP-420 amplifier’s input connection is one balanced XLR (with lock) female per channel, and the signal out connection is one SPEAKON per channel connection to loudspeakers.

The Antakipro AP-420 amplifier has an item model number of AP-420, and it is manufactured by ANTAKIPRO in China. Its ASIN is B0C3PN3VDV, and its country of origin is China.